LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood >> Hood Latch Striker >> Installation

Hood Latch Striker: Installation

  1. Position hood latch striker on vehicle (Fig. Figure ).
  2. Install bolts attaching hood latch striker to hood.
  3. Align hood latch striker to engage smoothly into hood latch.
  4. Verify hood operation and alignment. Adjust as necessary.
  5. Tighten attaching bolts to 13.5 N.m (10 ft. lbs.) torque.
scientia non olet · About LEMON Manuals