LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Frames & Bumpers >> Front Bumper Fascia >> Removal

Front Bumper Fascia: Removal

  1. Remove Grille Attaching screws.
  2. Remove Grille.
  3. Remove nuts attaching front bumper fascia to bottom of fender flange (Fig 1 ).
    Fig 1: Removing And Installing Front Bumper Fascia
    G02666174Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove fasteners attaching fascia to fender flange (Fig 2 ).
    Fig 2: Identifying Front Fascia Attaching Points
    G02666175Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove air dam fasteners from crossmember.
  6. Remove splash shield attaching screws.
  7. Remove fascia from vehicle.
scientia non olet · About LEMON Manuals