LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Chime & Buzzer >> Chime/Buzzer >> Diagnosis And Testing >> Diagnosis And Testing - Chime Conditions >> No Tone When Ignition Switch Is Turned On And Drivers Seat Belt Is Unbuckled

No Tone When Ignition Switch Is Turned On And Drivers Seat Belt Is Unbuckled

  1. Using an ohmmeter, with the seat belt fully retracted, check for continuity to ground at Pin 20 of the 26-way cluster harness connector. If OK, go to step 2. If not OK, repair as necessary.
  2. Using voltmeter, check for battery feed at Pin 4 of the 26-way cluster harness connector. Check for ignition feed at Pin 14 of the 26-way cluster harness connector. If not OK, repair as necessary.
scientia non olet · About LEMON Manuals