LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems - Exterior >> Park/Turn Signal Lamp >> Removal

Park/Turn Signal Lamp: Removal

  1. Remove headlamp access cover in splash shield (Fig 1 ).
    Fig 1: Removing/Installing Head Lamp Access Cover
    G02663709Courtesy of DAIMLERCHRYSLER CORP.
  2. Rotate socket counterclockwise one quarter turn.
  3. Remove bulb and socket from headlamp unit.
  4. Disconnect wire connector from back of front side marker/park/turn signal lamp.
scientia non olet · About LEMON Manuals