LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting Systems - Exterior >> License Plate Lamp >> Removal

License Plate Lamp: Removal

  1. Remove screws attaching license plate lamp to rear bumper (Fig 1 ).
    Fig 1: Removing/Installing License Plate Lamp
    G02663698Courtesy of DAIMLERCHRYSLER CORP.
  2. Remove lamp from bumper.
  3. Remove bulb socket from lamp housing.
  4. Pull bulb from socket.
scientia non olet · About LEMON Manuals