LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> PT Cruiser Limited, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panels - Weatherstrip & Seals >> Rear Door Inner Belt Weatherstrip >> Removal

Rear Door Inner Belt Weatherstrip: Removal

  1. Remove door trim panel.
  2. Remove inner belt weatherstrip from door. If necessary, use a rubber mallet and a block of wood, tapping upward at each clip attaching the molding to the door (Fig 1 ).
    Fig 1: Removing Rear Door Weatherstrip
    G02664120Courtesy of DAIMLERCHRYSLER CORP.