LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (HVAC Systems - Manual) >> Removal & Installation >> Blower Motor >> Removal

Blower Motor: Removal

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood and disconnect the negative battery cable remote terminal from the remote battery post. Remove the lower right under panel duct.
  2. Remove the blower motor connector from the blower motor resistor block/power module. Squeeze the blower motor wiring grommet and push the grommet through the blower motor housing cover.
  3. Remove the blower motor housing cover. Remove the blower motor retaining screws. Lower the blower motor from housing.
scientia non olet · About LEMON Manuals