Blower Motor Resistor Block: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor resistor in the HVAC housing. Install the 2 screws that secure the blower motor resistor to the HVAC housing and tighten.
- Plug in the harness connector to the blower motor resistor. Install the lower right underpanel silencer/duct. Connect the negative battery cable remote terminal to the remote battery post.