A/C Compressor Clutch Relay: Removal

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect and isolate the battery negative cable. Remove the cover from the Power Distribution Center (PDC). See Fig 1 .
Refer to the label on the PDC for compressor clutch relay identification and location. Unplug the compressor clutch relay from the PDC.

Fig 1: Removing Compressor Clutch Relay

Courtesy of CHRYSLER CORP.