Removal (Intermediate Cable)
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle.
- Loosen the parking brake cable tensioner adjuster nut until tension is removed from cables.
- Disconnect the cable connector between the front and intermediate cable.
- Remove the bolt attaching the intermediate cable retainer to the body torque box. See Fig 1 .
- Remove the connector from the intermediate cable at the right rear parking brake cable.
- Remove the intermediate cable from the tensioner bracket using the box end of a 1/2" wrench.
- Release the latch on the routing clip for the intermediate cable, mounted above the left rear cable retainer clip, on rear suspension crossmember.
- Remove the intermediate parking brake cable.