Parking Brake Cable TENSIONER: Removal
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support vehicle.
- Remove the parking brake tensioner adjuster nut, releasing the tensioner from the equalizer bracket to the intermediate cable. See Fig 1 .
- Disconnect the connector and remove the parking brake cable tensioner from the left rear parking brake cable. See Fig 1 .
- Remove the parking brake cable tensioner with its isolator from the vehicle.