LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0351: Ignition Coil #1 Circuit, DTC P0352: Ignition Coil #2 Circuit, DTC P0353: Ignition Coil #3 Circuit, DTC P0354: Ignition Coil #4 Circuit, DTC P0355: Ignition Coil #5 Circuit Or DTC P0356: Ignition Coil #6 Circuit >> Monitored & Set Conditions

Monitored & Set Conditions

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Ignition coil primary circuit is monitored when battery voltage is greater than 8 volts during engine cranking or greater than 12 volts with engine running, engine RPM less than 3000, and none of the coils in dwell when checked. DTC will set when peak current is not achieved with battery based dwell plus 1.5 milliseconds of diagnostic offset. It takes less than 3 seconds during cranking or up to 6 seconds while running to set.