Monitored & Set Conditions
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Sensor (CMP) sensor signal is monitored with engine cranking or running. DTC will set when at least 5 seconds or 2.5 revolutions have elapsed with Crankshaft Position (CKP) sensor signals present but no signal from Camshaft Position (CMP) sensor.