Test Light
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Many of the following testing procedures call for use of test light instead of DVOM to indicate voltage on a circuit. Manufacturer recommends test light with a minimum resistance of 25 ohms to load circuit. Always compare brightness of test light once connected to specified circuit with that of direct connection to battery voltage. A dim light could indicate a poor connection or high resistance in circuit.