Generic Scan Tool & DVOM
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Self-diagnostic tests are written specifically for Chrysler's Diagnostic Readout Box (DRB-III) scan tool. DRB-III has a built-in DVOM function. A generic scan tool may be used, but may not be capable of performing all necessary test functions. If DRB-III test procedures require resistance or voltage to be measured using scan tool in ohmmeter or voltmeter mode, perform the following:
- Connect DVOM ground lead to DLC connector terminal No. 4, and positive lead to terminal specified in test procedure.