LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Automatic Transmission Diagnosis) >> Self-Diagnostic System >> Test Equipment Hook-Up >> DRB-III Scan Tool

DRB-III Scan Tool

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Refer to DRB-III scan tool instructions to retrieve and clear DTCs, and when performing other scan tool functions. DRB-III scan tool is grounded through DLC connector terminal No. 4. Only one volt/ohmmeter test lead is required to measure voltage or resistance. DRB-III scan tool volt/ohmmeter mode should only be used when specified by test procedure.

scientia non olet · About LEMON Manuals