Pressure Test Preparation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure shift linkage or cable, transaxle fluid level and condition are okay. Add fluid and adjust shift control cable or linkage as necessary.
- Ensure transaxle fluid is at normal operating temperature of 150-200°F (66-93°C). Install tachometer. Raise vehicle on hoist, allowing front wheels to rotate freely.
NOTE:
A 300 psi (21 kg/cm2
) pressure gauge and Adapter (L-4559) are required for checking hydraulic pressures.