Circuit Description
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0755 will set if 3 consecutive solenoid continuity tests fail, or one test fails if run in response to a gear ratio or pressure switch error. Once DTC P0755 is set, MIL illuminates and the transaxle goes into Neutral if DTC is set above 22 MPH. If DTC is set when vehicle speed is below 22 MPH, transaxle goes into limp-in mode.