Seat Cushion Element
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
Unplug suspect heated seat cushion 4-pin connector located under seat near rear edge of seat cushion frame. Using DVOM, check continuity between heated seat cushion terminals "A" and "B". See Fig 3 and Fig 4 . If continuity does not exist, replace heated seat cushion element. If continuity exists, check continuity between heated seat cushion terminal "B" and ground. If continuity does not exist, test heated seat back element. See SEAT BACK ELEMENT . If continuity exists, replace heated seat cushion element.