LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Air Bag Restraint Systems) >> Vehicle Communications >> Test 1C: Vehicle Communication Problems >> Drbiii Blank Screen

Drbiii Blank Screen

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

If DRBIII Screen is blank, disconnect DRBIII from data link connector. Inspect for loose wiring connections or damaged harness or connectors. Ensure continuity to ground exists at data link connector terminals No. 4 and 5. See Figure . Ensure at least 11 volts exists at data link connector terminal No. 16. If 11 volts does not exist, check for faulty circuit leading to DLC terminal No. 16. If no problem can be found, malfunction with DRBIII, DRBIII cable or vehicle wiring harness may be present.

scientia non olet · About LEMON Manuals