LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Air Bag Restraint Systems) >> Diagnostic Tests >> Test 1A: Accelerometer 1, Accelerometer 2, Internal 1, Internal 2, Output Driver 1, Output Driver 2, Stored Energy Firing 1

Test 1A: Accelerometer 1, Accelerometer 2, Internal 1, Internal 2, Output Driver 1, Output Driver 2, Stored Energy Firing 1

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Prior to performing any air bag system test, go to PRETEST INSPECTION & DIAGNOSTIC PROCEDURE  under DIAGNOSTICS. Perform TEST VER-1: AIR BAG VERIFICATION TEST  after all repairs unless otherwise directed.

Turn ignition switch to ON position. Using DRBIII, determine which control module is generating Diagnostic Trouble Code (DTC). If Occupant Restraint Controller (ORC), right Side Impact Air Bag Control Module (SIACM) or left SIACM is generating active or stored DTCs, replace appropriate control module. See REMOVAL & INSTALLATION  .