LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Removal, Overhaul & Installation - Except Coupe) >> Fuel Systems >> Throttle Body >> Installation (2.7L)

Installation (2.7L)

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosely install 2 throttle body mounting bolts. Install throttle cable bracket. Install other throttle body mounting bolt and throttle body support bracket. Tighten throttle body support bracket bolts to specification. See TORQUE SPECIFICATIONS .
  2. Tighten throttle body mounting bolts to specification. Hold throttle lever in wide open throttle position, and install throttle and speed control cables. Install throttle cable shield. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals