LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Removal, Overhaul & Installation - Except Coupe) >> Engine Sensors & Switches >> Inlet Air Temperature Sensor >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

IAT sensor removal and installation procedures are not available from manufacturer. For an aid in removal and installation, see illustrations. See Fig 1 or Fig 2 .

Fig 1: Locating IAC Motor, IAT Sensor & TP Sensor (2.4L)
G00030256Courtesy of DAIMLERCHRYSLER CORPORATION
Fig 2: Locating IAT Sensor & TP Sensor (2.7L)
G00030257Courtesy of DAIMLERCHRYSLER CORPORATION