LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Controls - Removal, Overhaul & Installation - Except Coupe) >> Computerized Engine Controls >> Powertrain Control Module >> Notes

Powertrain Control Module: Notes

WARNING: This page is about a different car, the 2002 Dodge Stratus and 2002 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If replacing Powertrain Control Module (PCM), the correct vehicle mileage and Vehicle Identification Number (VIN) must be programmed into the PCM to prevent Diagnostic Trouble Codes (DTC) from being set in the Controller Anti-Lock Brake (CAB) module, Sentry Key Immobilizer Module (SKIM) and Air Bag Control Module (ACM). To program PCM and clear DTCs from CAB, SKIM and ACM modules, see PROGRAMMING . If replacing both PCM and SKIM at the same time, first program PCM, then program SKIM. Replace all ignition keys and program them to new SKIM.