Removal & Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Idle Air Control (IAC) motor is located on side of throttle body. On 3.5L, disconnect air intake hose from throttle body. On all models, remove retaining screws and IAC motor with "O" ring from throttle body.
- To install, reverse removal procedure using NEW "O" ring. Tighten retaining screws to specification. See TORQUE SPECIFICATIONS .