LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Removal, Overhaul & Installation) >> Miscellaneous Controls >> Short Runner Valve >> Removal & Installation (3.5L)

Removal & Installation (3.5L)

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Short Runner Valve (SRV) is located on front of engine. See Figure. Disconnect rod on SRV. Remove bolts attaching SRV to intake manifold.
  2. Disconnect SRV harness connector. Remove SRV. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals