Removal & Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
All engines are equipped with 2 ignition coil capacitors, one for each cylinder bank. See Fig 1. Disconnect negative battery cable at remote battery terminal on passenger's side strut tower. Disconnect ignition coil capacitor. Remove ignition coil capacitor nut and capacitor. To install, reverse removal procedure.