LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Removal, Overhaul & Installation) >> Ignition Systems >> Camshaft Position Sensor >> Installation (2.7L)

Installation (2.7L)

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install CMP sensor in timing chain cover. Push CMP sensor fully downward against timing chain cover.
  2. Install and tighten CMP sensor bolt to specification while holding CMP sensor downward. See TORQUE SPECIFICATIONS . Install CMP sensor harness connector.
scientia non olet · About LEMON Manuals