Removal & Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Ambient temperature sensor is located on the inside of the right front bumper beam. See Fig 1.
- Raise and support vehicle. Disconnect negative cable battery at remote battery terminal on passenger's side strut tower. From behind front bumper, remove retaining screw for ambient temperature sensor from radiator core support.
- Disconnect electrical connector and remove ambient temperature sensor. To install, reverse removal procedure.