Natural Vacuum Leak Detection Assembly: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install "O" ring to EVAP canister. Install NVLD assembly and twist the assembly clockwise to lock assembly in the EVAP canister.
- Connect the hoses to the NVLD assembly. Connect the electrical connector to the NVLD assembly. Install fuel tank. See FUEL TANK under FUEL SYSTEMS. Reconnect negative battery cable at remote battery terminal on passenger's side strut tower.