LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Removal, Overhaul & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. EVAP canister is located above fuel tank. See Figure. Remove fuel tank for access to EVAP canister. See FUEL TANK  under FUEL SYSTEMS.
  2. Disconnect hoses at EVAP canister. Remove nuts from upper bracket on EVAP canister. Remove EVAP canister from bracket. Remove EVAP leak detection pump from EVAP canister. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals