LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Removal, Overhaul & Installation) >> Emission Systems & Sub-Systems >> EGR Valve Assembly >> Removal (3.5L)

Removal (3.5L)

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. EGR valve is located at rear of right cylinder head. Disconnect negative battery cable at remote battery terminal on passenger's side strut tower.
  2. Remove air inlet tube and resonator. Disconnect EGR valve assembly harness connector. Remove EGR pipe-to-EGR valve assembly bolts. See Figure. Remove EGR mounting bolts, EGR valve assembly and gasket.
scientia non olet · About LEMON Manuals