Removal (2.7L)
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- EGR valve is located at rear of right cylinder head. Disconnect negative battery cable at remote battery terminal on passenger's side strut tower. Loosen clamp at air intake hose on throttle body. Remove air cleaner housing and air inlet hose. Disconnect EGR valve assembly harness connector.
- Remove EGR upper pipe-to-EGR valve assembly bolts. See Fig 2. Remove EGR valve assembly bolts. Remove EGR lower pipe-to-exhaust manifold bolts. Remove EGR valve and tube as an assembly. Clean gasket surfaces.