LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2003 >> Intrepid ES, 3.5 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (HVAC Systems - Automatic) >> Removal & Installation >> A/C Pressure Transducer >> Installation

A/C Pressure Transducer: Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the A/C pressure transducer on the discharge line fitting and tighten.
  2. Plug in the wire harness connector to the A/C pressure transducer.
  3. Connect the battery negative cable to the remote battery post.
scientia non olet · About LEMON Manuals