A/C Expansion Valve: Installation
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always install new O-rings when replacing the A/C expansion valve.
- Install the A/C expansion valve on the A/C evaporator. Tighten the fasteners to specifications. See TORQUE SPECIFICATIONS . Connect the lines to the expansion valve and tighten the retaining nut. Tighten the bolt at the receiver/drier.
- Install the engine air inlet tube and the air distribution duct on vehicles equipped with 3.5L and 3.5L engine. Evacuate and charge the refrigerant system. See RECOVERY, EVACUATION & RECHARGING in GENERAL SERVICING PROCEDURES article in GENERAL SERVICING.