A/C Evaporator: Removal
WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, 2002 Chrysler Concorde, and 2002 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Open the hood and disconnect the negative battery cable remote terminal from the remote battery post. Remove the HVAC housing from vehicle. See HVAC HOUSING . Remove the recirculation door actuator. See RECIRCULATION DOOR ACTUATOR .
- Remove the recirculation door and housing. Remove the upper HVAC housing retaining screws. At the center of the HVAC housing, locate the evaporator probe access plate. Using a flat blade pry tool, pull back on the locking tab. Twist the access plate counter clockwise one-quarter turn, and push the plate inside the HVAC housing. Remove the upper half of the HVAC housing. Lift the evaporator out of the lower housing.