No Display (Internal Cluster Failure)
- Perform instrument cluster self-test. See INSTRUMENT CLUSTER SELF-TEST under SELF-DIAGNOSTIC SYSTEM. Go to next step.
- If odometer segments all light up during test, go to ERRATIC DISPLAY (INTERNAL CLUSTER FAILURE) . If odometer segments do not light up during test, remove instrument cluster from instrument panel. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Check power and ground circuits at instrument cluster connector. See WIRING DIAGRAMS . If any problem is found, repair wiring as necessary. If no problem is found, replace instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION.