Self-Diagnostic System: Self-Diagnostics

This procedure will initiate a self-check within the instrument cluster. To place instrument cluster in self-diagnostic mode, turn ignition on while pressing trip rest button. Release trip reset button. Gauges will move in increments and all indicators will turn on with exception of the liftgate ajar and foglight indicators. If any gauges or indicators do not work properly or any messages are displayed in odometer/trip Vacuum Fluorescent (VF) display, diagnose and repair related system as necessary. See appropriate test under SYSTEM TESTS . For additional self-diagnostic system testing procedures, see SELF-DIAGNOSTIC SYSTEM in BODY CONTROL MODULES article.