LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Cluster Bezel >> Installation

Cluster Bezel: Installation

    NOTE: If replacing the instrument cluster bezel, the A/C outlet housing assembly must be transferred to the new bezel.
  1. Insert turn signal lamps into the instrument cluster bezel.
  2. Position instrument cluster bezel in position making sure all fasteners are lined up with their respective slots.
  3. Gently, but forcefully, snap the instrument cluster bezel into place.
  4. Install the left instrument panel end cap. See LEFT INSTRUMENT PANEL END CAP .
  5. Install the left lower instrument panel bezel. See LEFT LOWER INSTRUMENT PANEL TRIM BEZEL .
  6. Install the instrument panel top cover. See INSTRUMENT PANEL TOP COVER .
  7. Connect the battery negative cable. Close the hood. Verify vehicle and system operation.
scientia non olet · About LEMON Manuals