Accessory Switch Bezel: Removal
- Open hood. Disconnect and isolate the battery negative cable.
- Remove the instrument panel center bezel. See INSTRUMENT PANEL CENTER BEZEL . Remove two screws retaining the accessory switch bezel. See Figure.
- Disconnect the harness connectors to the following:
- Rear Window Defogger Switch (if equipped)
- Traction Control Switch (if equipped)
- Cigar Lighter/Power Outlet
- Rear Windshield Washer/Wiper Switch
- To remove switches from bezel, use both thumbs and slightly pull out on the two walls that are holding the switches.