LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> PT Cruiser Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Instrument Panel Top Cover >> Removal

Instrument Panel Top Cover: Removal

  1. Open hood. Disconnect and isolate the battery negative cable.
  2. Using a trim stick, gently pry off the left and right A-pillar trim.
  3. Using a trim stick or equivalent, gently pry out the front power window switch from the instrument panel center bezel. See Figure. Disconnect the harness connector and remove.
  4. Remove the one center bezel retaining screw.
  5. Pull off the HVAC control knobs.
  6. Using a trim stick or equivalent, gently pry off the center bezel and remove. See Figure.
  7. Remove the two top cover attaching screws. Gently pull rearward on the top cover and unlatch it from the instrument panel and remove. See Figure - Figure .
scientia non olet · About LEMON Manuals