Instrument Panel Top Cover: Removal
- Loosen the two screws at each end off the defroster slot until they are flush with top cover surface.CAUTION: Do not remove top cover
- Remove the screw at each end of the top cover.
- Using a Trim Stick (C-4755), gently pry out on both the left and right A-pillar trim panels and remove.
- Use care not to scratch the panel. Lift up at each end of the cluster bezel and along the rearward edge of the top cover to disengage the clips.
- Pull the top cover rearward until the forward pins disengage from the instrument panel.