Upper Right Trim Bezel (300M): Removal
- Open hood and disconnect the negative battery cable remote terminal from the remote battery post (Figure).
- Using a trim stick (special tool #C-4755) or equivalent, gently pry out on center instrument panel bezel.
- Open glove box and remove four screws along bottom edge of trim bezel.
- Remove one screw in center bezel area.
- Loosen the lower right edge of steering column cover, then loosen upper right corner of steering column cover.
- Using a trim stick or equivalent, gently pry bezel away from the instrument panel and disconnect the traction control switch connector.
- Remove upper right trim bezel from vehicle (Fig 1).
Courtesy of DAIMLERCHRYSLER CORP.