LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Disc Brakes >> Removal & Installation >> Parking Brake Shoes >> Removal

Parking Brake Shoes: Removal

  1. Remove rear caliper assembly. See CALIPER  .
  2. Remove rear rotor from rear hub. See ROTOR  .
  3. Remove dust cap from rear hub.
  4. Remove the cotter pin, nut retainer, wave washer and rear hub/bearing assembly retaining nut and washer from the rear spindle.
  5. Remove rear hub and bearing assembly from rear spindle.
  6. Remove rear brake shoe assembly hold down clip.
  7. Turn brake shoe adjuster wheel until adjuster is at its shortened length.
  8. Remove the adjuster assembly from the parking brake shoe assemblies.
  9. Remove lower shoe-to-shoe spring.
  10. Pull rear brake shoe assembly away from anchor, then remove rear brake shoe and upper spring.
  11. Remove front brake shoe hold-down clip, then remove front brake shoe assembly.
scientia non olet · About LEMON Manuals