LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Brakes >> Parking Brake System >> Disc Brakes >> Removal & Installation >> Parking Brake Cable TENSIONER >> Removal

Parking Brake Cable TENSIONER: Removal

  1. Raise and support vehicle.
  2. Remove the parking brake tensioner adjuster nut, releasing the tensioner from the equalizer bracket to the intermediate cable. See Fig 1 .
  3. Disconnect the connector and remove the parking brake cable tensioner from the left rear parking brake cable. See Fig 1 .
  4. Remove the parking brake cable tensioner with its isolator from the vehicle.
Fig 1: Removing & Installing Parking Brake Cable Tensioner
G00293142Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals