Removal (Intermediate Cable)
- Raise and support vehicle.
- Loosen the parking brake cable tensioner adjuster nut until tension is removed from cables.
- Disconnect the cable connector between the front and intermediate cable.
- Remove the bolt attaching the intermediate cable retainer to the body torque box. See Fig 1
.
- Remove the connector from the intermediate cable at the right rear parking brake cable.
- Remove the intermediate cable from the tensioner bracket using the box end of a 1/2" wrench.
- Release the latch on the routing clip for the intermediate cable, mounted above the left rear cable retainer clip, on rear suspension crossmember.
- Remove the intermediate parking brake cable.
Courtesy of CHRYSLER CORP.