LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Disc Brake Shoes >> Removal (Front)

Removal (Front)

  1. Raise vehicle.
  2. Remove front wheel and tire assemblies from the vehicle.
  3. Remove caliper. See CALIPER  .
  4. Remove outboard brake shoe by prying the shoe retaining clip over raised area on caliper. Then slide the brake shoe off the caliper. See Fig 1 .
  5. Pull inboard brake shoe away from piston until retaining clip is free from cavity in piston. See Fig 2 .
Fig 1: Removing Outboard Brake Shoe (Front)
G00293127Courtesy of CHRYSLER CORP.
Fig 2: Removing & Installing Inboard Brake Shoe (Front)
G00309427Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals