LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Upper Right Trim Bezel (300M) >> Installation

Upper Right Trim Bezel (300M): Installation

  1. Position upper right trim bezel over slots in instrument panel and firmly snap into place. If equipped with traction control, connect connector.
  2. Tighten the lower right edge of steering column cover, then tighten upper right corner of steering column cover.
  3. Install the one screw in center bezel area.
  4. Install the four screws along bottom edge of trim bezel and close glove box.
  5. Position center instrument panel bezel over slots and firmly snap into place.
  6. Connect the negative battery cable remote terminal to the remote battery post (Figure).
scientia non olet · About LEMON Manuals