LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Storage Bin - 5 Passenger Vehicles >> Installation

Storage Bin - 5 Passenger Vehicles: Installation

  1. Install the two retaining screws to the storage bin.
  2. Install the instrument panel center trim bezel.
  3. Connect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch (if equipped).
  4. Firmly snap the center trim bezel into place.
  5. Install the ash receiver (if applicable).
  6. Connect the negative battery cable remote terminal to the remote battery post (see Figure).
scientia non olet · About LEMON Manuals