LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2002 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Analog Instrument Panels >> Removal & Installation >> Odometer >> Removal & Installation

Removal & Installation

  1. Remove instrument cluster. See INSTRUMENT CLUSTER & BEZEL . Remove back cover retaining screws. Disconnect odometer Vacuum Fluorescent (VF) display connector from printed circuit board.
  2. Remove mask/lens retaining screws and release retaining clips to remove mask/lens. Remove VF display retaining screws and remove from cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals